Billet inner cage carrier
Forged Basket A (2,4,6)
Forged Basket B (1,3,5)
18 carbon frictions 1.8mm
16 steel plates 1.2mm, heat treated and surface ground
2 steel shim plates 1.8mm, heat treated and surface ground
]]>
1-R £500
2nd/4th : £500
3rd/5th : £500
6th : £500
Billet selector forks 1-6 for the Nissan GTR is made from a solid billet piece of high strength steel and carved to perfection. Its precision in design and engineering means it is lighter and stronger and can withstand any beating in the toughest conditions. It has been chemically treated to be extremely durable and finished with REM isotropic superfinishing to reduce friction and decrease heat
Stronger material
CNC milled for precision
Reduced friction
Easy installation
REM isotropic superfinished
Latest heat treatment process technology
Every part is coded for easy identification
Benefits:
Notes
]]>
Following years of detailed design, analysis and testing we are excited to announce a completely
new generation of GT-R gear sets. Designed and manufactured in the UK, the range offers enhanced
ground tooth geometry delivering exceptional torque characteristics and a greatly enhanced duty
cycle. This has been achieved by bringing together the very best materials and treatments developed
over many years. heavy duty gears made from Aero/Mill spec material incorporating the latest tooth
profiles machined on state of the art CNC machinery, heat treated and Duplex shot penned for
maximum strength and reliability
• Designed, engineered & manufactured in England
• DIN 3 quality
• New 2nd, 3rd, 4th 5th, 6th gear design to reinforce and hold more power, improved helical
angle for low noise operation
Revised & improved teeth spec – Wider Gears, Thicker teeth
• Motorsport grade Alloy aerospace steel (as used in F1, DTM, GT500) single melt case
hardened all gears 1-6 & cluster
• State of the art motorsport machining inc 6 axis gear grinder- kleinberg Holfer viper 500. A
Viper K 500 machine costs in excess of £500k one of only two machines in UK, very few
outside of Germany, these allow the highest level of gear grinding possible. Capable of
finishing gears to incredible accuracy, meeting even the extreme tolerances required for
high end motorsport. Most GT-R gears on the market suffer from poor quality grinding and
not to the tooth root where most cracks/breakages occur
• Heat Treatment
• Gears shot peened and ground for maximum strength
• Oerlikon DLC Coating available as option
https://www.oerlikon.com/balzers/uk/en/portfolio/balzers-surface-solutions/pvd-andpacvd-based-coating-solutions/balinit/carbon-dlc-based/balinit-dlc/ http://www.f1-
forecast.com/pdf/F1-Files/Honda/F1-SP2_43e.pdf
Program- dontyne tooth contact analysisCNC Gear Cut – Gleason P300 & P90
CNC Gear Grinding – KLINGENBERG Höfler Viper 500K Gear Grinding
Gear Measurement – Gleason 475GMS CNC
CNC Teeth milling – CNC MATSUURA VX‐1000, 5-Axis Mazak (i600)
Turning- 5-Axis Mazak (i600)
CNC Grinding – CNC JONES AND SHIPMAN ULTRAMAT 1000
Super Finishing & Deburring
Heat Treatment- Ipsen Turbo 2 Vacuum furnace
Shot peen- 3-axis Vacublast
CAD design, Finite Element Analysis, gear simulation software
CAD models to simulate including efficiency analysis, product lifing, performance and deflections
]]>
OEM ring & pinion replacement price is $1000
GT-R FRONT BILLET CROWN WHEEL PINION HYPOID 16X47 2.93 MODULE OEM EN36C CASE HARDEN SHOT PEEN
Up to 50% stronger by design and material specification, these gears are designed to give the maximum performance possible whilst retaining the OE GT-R front stock casings with no other modifications needed. Material specification EN36C. Stock Bearings compatible
Front GT-R Billet Crown Wheel & Pinion £1000
GT-R Front CWP Backlash 0.10-0.15
How to measure backlash
* professional install is essential clearance/lash/shimming required.. incorrect set up, running low on oil, Locked/damaged ETS will cause terminal damage to your FWD.. must be used with billet side bearing to prevent bolts backing out (oem side bearing can crack).
There is no warranty stated or implied due to the stresses placed on your vehicle by performance parts and our inability to monitor their use, tuning, or modification.
]]>Recommend 18-20 nm
]]>